PCB Circuit Design with Eagle Training Course
PCB (Printed Circuit Board) Circuit Design refers to the process of designing, etching, and printing circuits on a signal boards layout. EAGLE is a freely available desktop application for designing PCBs.
In this instructor-led, live training, participants will learn how to use the Eagle software to create PCB circuit boards. The course starts by examining a set of existing schematics, then drawing out an original circuit in Eagle. The training steps through process for designing the circuit board and discusses the process for manufacturing the boards (the course does not include the physical manufacturing of the boards).
By the end of this training, participants will be able to:
- Create a Printed Circuit Board (PCB) from any schematic
- Create schematics and design circuit boards using Eagle
- Export the industry-standard files for constructing the circuit board
Audience
- Engineers
- Technicians
Format of the Course
- Part lecture, part discussion, exercises and heavy hands-on practice
Notes
- To request a customized training for this course, please contact us to arrange.
Course Outline
Introduction
- Overview of PCB design process and its role in electronic systems.
- Introduction to Eagle software: features, interface, and setup.
- Understanding basic electronic components and theoretical concepts.
Installing and Configuring Eagle and EasyEDA
- Installation and configuration of Eagle software.
- Introduction to EasyEDA software for PCB design.
Eagle Features and Component Libraries
- Exploring Eagle features for PCB design
- Utilizing component libraries in Eagle
Schematic Design
- Drawing a schematic in Eagle and EasyEDA
- Analyzing the operation of electronic components in the circuit
PCB Layout Design
- Translating schematic designs into PCB layouts using Eagle and EasyEDA
- Layout optimization, trace routing, and PCB stack-up
Checking for Errors and Signal Integrity
- Verifying the PCB layout for errors using Eagle and EasyEDA
- Minimizing noise, crosstalk, and signal integrity issues
Generating Gerber Files for Manufacturing
- Generating manufacturing-ready Gerber files using Eagle and EasyEDA
- Understanding the use of each Gerber file applicable for any PCB design software
Quoting and Manufacturing PCBs
- Overview of quoting the manufacture of PCBs through industrial manufacturers
- Manufacturing prototype PCB cards with a professional finish using accessible materials
Troubleshooting
Summary and Conclusion
Requirements
- An understanding of electronics
Open Training Courses require 5+ participants.
PCB Circuit Design with Eagle Training Course - Booking
PCB Circuit Design with Eagle Training Course - Enquiry
PCB Circuit Design with Eagle - Consultancy Enquiry
Consultancy Enquiry
Testimonials (2)
Anil was very understanding and explained the course content in detail. With more time the outcome of the course would be better instead of rushing the content, but over all Anil is very familiar with the software CATIA and is a great trainer,
Jaydon - GRI Towers South Africa
Course - Learning CATIA
Learning all the things that I wasn't understand it.
Anonymous
Course - SolidWorks
Provisional Upcoming Courses (Require 5+ participants)
Related Courses
Solidworks for Industrial Automation
35 HoursThis instructor-led, live training in Hong Kong (online or onsite) is aimed at intermediate-level mechanical engineers and CAD designers who wish to use SolidWorks to design and implement industrial automation systems.
By the end of this training, participants will be able to:
- Install and configure SolidWorks for automation design.
- Design, simulate, and analyze industrial automation components and systems.
- Export designs for real-world implementation in industrial settings.
Applying SysML with Magic Draw
24 HoursThe course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the Magicdraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE.
Buildroot: a Firmware Generator for Embedded Systems
7 HoursBuildroot is an open-source project that contains scripts that produce a cross-compilation toolchain, a customizable root filesystem image, and a Linux kernel for embedded devices. During this practical course, participants will learn how to use it:
- How to select software that goes into the root filesystem.
- How to add new packages and modify existing ones.
- How to add support for new embedded boards.
During the course, bootable filesystem images will be produced. Remote courses are delivered using the QEMU emulator, while in the classroom it is possible to use either QEMU or real embedded boards of the trainer's choice.
Other projects with similar goals include the Yocto project and OpenWRT. Please use these presentations to determine which one is the right choice for your needs.
Learning CATIA
14 HoursThis instructor-led, live training in Hong Kong (online or onsite) is aimed at web designers who wish to use CATIA to develop and design 2D and 3D models.
By the end of this training, participants will be able to:
- Support multiple stages of product development including design, manufacturing, and engineering.
- Facilitate the design of various systems, such as fluid systems.
- Apply CATIA to a wide variety of industries and industrial equipment.
CATIA V5 Fundamentals
14 HoursThis instructor-led, live training in Hong Kong (online or onsite) is aimed at beginner-level to intermediate-level web designers who wish to learn how to use CATIA V5 for collaborative product creation and product data management.
By the end of this training, participants will be able to:
- Understand the CATIA V5 interface and navigation.
- Create 2D sketches and transform them into 3D models.
- Develop assemblies to combine multiple components.
CATIA V5 Fundamentals - 3 Days
21 HoursThis instructor-led, live training in Hong Kong (online or onsite) is aimed at beginner-level to intermediate-level web designers who wish to learn how to use CATIA V5 for collaborative product creation and product data management.
By the end of this training, participants will be able to:
- Understand the CATIA V5 interface and navigation.
- Create 2D sketches and transform them into 3D models.
- Develop assemblies to combine multiple components.
LEDE: Set Up a Linux Wireless Router
7 HoursThe LEDE Project (Linux Embedded Development Environment) is a Linux operating system based on OpenWrt. It is a complete replacement for the vendor-supplied firmware of a wide range of wireless routers and non-network devices.
In this instructor-led, live training, participants will learn how to set up a LEDE based wireless router.
Audience
- Network administrators and technicians
Format of the course
- Part lecture, part discussion, exercises and heavy hands-on practice
MBSE with Automation
40 HoursThe course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training covers the fundamentals of creating templates and generating reports within the MagicDraw/Cameo tool suite, and teaches how macros and scripts work inside MagicDraw and what they can be applied to.
MBSE with Model Analysis
40 HoursThe course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training teaches the core concepts and features of validation rules, validation suites, and model metrics and is designed to introduce the core concepts and features of developing and utilizing model queries in MagicDraw/Cameo.
OpenSCAD: Introduction to 3D Modeling
21 HoursThis instructor-led, live training in Hong Kong (online or onsite) is aimed at designers, mechanical engineers, and anyone who wishes to learn how to create 3D models that can be constructed or 3D printed.
By the end of this training, participants will be able to:
- Create printable 3D models.
- Use geometric transformations to build complex 3D shapes.
- Model in a non-interactive manner using minimal lines of code.
SketchUp for Architecture
14 HoursThis instructor-led, live training in Hong Kong (online or onsite) is aimed at architects who wish to create 3D models for architectural designs using SketchUp.
By the end of this training, participants will be able to:
- Use SketchUp to create 3D models of buildings, landscapes, scenes, furniture, etc.
- Apply different types of materials to the interior and exterior of a 3D structure.
- Geolocate a modeled structure for mapping realistic elements, such as shadows.
SolidWorks
14 HoursThis instructor-led, live training in Hong Kong (online or onsite) is aimed at mechatronics, mechanical, electrical, and electronics engineers who wish to use SolidWorks to sketch and produce a detailed drawing of their ideas and concepts.
By the end of this training, participants will be able to:
- Understand the fundamentals of SolidWorks.
- Design and create parts, assemblies, and 3D models with SolidWorks.
Advanced SolidWorks
28 HoursThis instructor-led, live training in Hong Kong (online or onsite) is aimed at intermediate-level to advanced-level mechatronics, mechanical, electrical, and electronics engineers who wish to further enhance their SolidWorks knowledge by mastering advanced part modeling, as well as other advanced features and shaping capabilities of SolidWorks.
By the end of this training, participants will be able to:
- Use multi-body solids, sweeping and lofting features, and more advanced SolidWorks features.
- Utilize the assembly modeling capabilities of SolidWorks.
- Master the advanced modeling features of SolidWorks.
Advanced SolidWorks - 5 Days
35 HoursThis instructor-led, live training in Hong Kong (online or onsite) is aimed at intermediate-level to advanced-level mechatronics, mechanical, electrical, and electronics engineers who wish to further enhance their SolidWorks knowledge by mastering advanced part modeling, as well as other advanced features and shaping capabilities of SolidWorks.
By the end of this training, participants will be able to:
- Use multi-body solids, sweeping and lofting features, and more advanced SolidWorks features.
- Utilize the assembly modeling capabilities of SolidWorks.
- Master the advanced modeling features of SolidWorks.
Introduction to Solidworks PDM
35 HoursThis instructor-led, live training in Hong Kong (online or onsite) is aimed at beginner-level users who wish to explore the core functionalities of Solidworks PDM and its applicability to their organization's design file management requirements.
By the end of this training, participants will be able to:
- Understand the key features and benefits of Solidworks PDM.
- Navigate the Solidworks PDM interface and workflows.
- Perform basic end-user tasks such as file check-in/check-out, versioning, and searching.
- Explore administrative functionalities, including vault configuration, user permissions, and workflow customization.
- Assess the potential implementation of Solidworks PDM across multiple company sites.